The SDVC40 feeder controller is designed specially for the feeder base that is piezoelectric

Introduction

The controller is designed for controlling vibratory feeder in the automation system. In most situation, the piezoelectric feeder base will be used, but the control method of which is different with electromagnetic type. we design the SDVC40 feeder controller for the piezoelectric feeder base, and it can provide the Maximum output current is 150 mA. The output frequency is from 40Hz to 400Hz and the working Ambient temperature is not allowed over 40 ℃.

Feature

Frequency adjustment: output frequency of the controller can be manually adjusted to resonant frequency of the vibratory feeder to get smooth and quiet.

Automatic High Precision Voltage Regulation: the internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.

Time Adjustable Soft Start: the controller will gently increase output voltage from 0 to the preset value when power on to avoid sudden shake. 

Photoelectric Sensor ON/OFF Control: The CUH intelligent photoelectric sensor can be connected to turn on/off the power output of the controller.

Remote Speed control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.

DC Control output: the controller can output 24V DC voltage associated with the ON/OFF State of the power output to drive a relay or other external devices.

Switch sensor ON/OFF Control: 1 NPN switch sensor or PLC can be connected to trun on/off the power output of the controller.

Note

1. Never hesitate contact CUH with any questions about feeder controller or automation.
2. If you have any technical problem, please contact us.
3. Email: mz@cuhnj.com
4. Tel : 86-25-84730416
5. Fax: 86-25-84730426

Introduction of SDVC20 variable voltage vibratory feeder controller

Introduction 

This series controller can remote the feeder speed by potentiometer, so as to make the controller positioned away from the control panel. The internal digital voltage regulation circuit can reduce feeder speed changes caused by Input power voltage fluctuation. The output waveform is sinusoidal which controlled by bidirectional thyristor. There are two output frequency can be output, one is the same as input power frequency and the other is double input power frequency. For example, if the input power frequency is 60Hz, the output frequency are 60Hz and 120Hz separately.

Function

1. Adjustable Soft Start Timer: the controller will smoothly increase output voltage from 0 to the preset value when the power on to avoid the feeder bowl shake.
2. Preset Speed (Feed Speed store and recall): 4 feed speeds can be preset, remote to change the feed speed by combination of two switch or PLC signals.
3. Remote Speed Control: Power output voltage of the controller can be adjusted remotely by an external potentiometer, a 1-5V DC signals of PLC or other 1-5V DC signals.
4. 24V DC output control: The controller can output 24V DC voltage follow the ON/OFF power output of controller to drive a relay switch or other external devices.
5. Dual switch sensor ON/OFF power output: 2 NPN switch sensors or PLC's relay can be conected to turn on/off the power output of controller.
6. CUH photoelectric sensor ON/OFF power output: The sensor can turn on/off the power output of controller.

Note

1. Never hesitate contact CUH with any questions about feeder controller or automation.
2. If you have any technical problem, please contact me.
3. Email: mz@cuhnj.com
4. Tel : 86-25-84730416
5. Fax: 86-25-84730426